Attended Transfer - Yealink SIP-T56A User Manual

Enter the number you want to transfer the call to.
-
Tap Transfer. The phone will prompt a dialog box. Tap Send to dial out. (The call will
automatically dial out in about 5 seconds if you do not tap Send.)
- Tap
contact to dial out.
Tap
-
desired contact to dial out. (Remote phone book should be configured in advance,
refer to
- Tap
Press
3.
If you are using a handset, the transfer can be completed by hanging up the handset.

Attended Transfer

Before performing an attended transfer (except you use dial number method), make sure that
the transfer mode via Dsskey is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to
To perform an attended transfer:
Press
1.
Do one of the following:
2.
Enter the number you want to transfer the call to.
-
Press
Enter the number you want to transfer the call to.
-
Tap Transfer. The phone will prompt a dialog box. Tap Send to dial out. (The call will
automatically dial out in about 5 seconds if you do not tap Send.)
- Tap
, and then tap Local Directory. Search for the contact and tap the desired
, and then tap Remote Phone Book. Search for the contact and tap the
Remote Phone Book on page
, and then tap the desired list. Tap the desired entry to dial out.
or tap the Transfer soft key to complete the transfer when receiving ringback.
or tap the Transfer soft key during a call.
to dial out.
, and then tap Local Directory. Search for the contact and tap the desired
115 for more information.)
Configuring Transfer Mode via DssKey
Basic Phone Features
on page 306.
287