Phone Status - Yealink SIP-T56A User Manual

Smart Media Phone
User Guide for SIP-T56A

Phone Status

You can view phone status via phone user interface or web user interface.
Available information of phone status includes:
General information (IP address, MAC address and firmware version)

Network status (IPv4 status or IPv6 status, IP mode and MAC address)

IPv4 uses a 32-bit address.
-
IPv6 is an updated version of the current Internet Protocol to meet the increased
-
demands for unique IP addresses, using a 128-bit address.
Phone status (product name, hardware version, firmware version, product ID, MAC address,

device certificate status and Android version)
Account status (register status of SIP accounts)

Storage information (internal storage, internal SD and USB storage)

The storage information is sorted and displayed with different categories. The following
table lists usage of each category:
Category
Apps
Cached data
Pictures,
videos
Audio
Downloads
Misc.
The operating system and system applications occupy some storage space. Therefore, the actual
available space will be smaller than the nominal space. Updates on the operating system and
firmware version may cause changes to the available space.
To view the phone status via phone user interface:
Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
1.
50
Display the memory cost of the application data and media content.
Tap to clear cached data for all apps.
Tap to view the pictures/videos by Gallery application.
Tap to open the file system of the storage. You can browse the file
system to view all audios in the internal SD card or USB flash drive.
Display the memory cost of the downloaded files.
Tap to display all folders on the IP phone. You can then select the folders
to be cleaned up.
Usage