Yealink SIP-T56A User Manual page 350

Smart Media Phone
User Guide for SIP-T56A
Leaving Voice Mails
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to answer the
call. Follow the voice prompt from the system server to leave a voice mail, and then hang up.
Configuring the Voice Mail Access Codes
To configure voice mail access codes via phone user interface:
Swipe left or right to go to the second idle screen.
1.
Tap
2.
Tap Set Voice Mail.
3.
Enter the voice mail access code (e.g., *88) in the desired account field.
4.
Tap to accept the change or
5.
Note Voice mail access codes must be predefined on the system server. Contact your system
administrator for the more information.
Listening to Voice Mails
To listen to voice mails:
When the touch screen prompts that the phone receives a new voice mail, press
1.
tap Connect to dial out the voice mail access code.
Follow the voice prompt to listen to your voice mails.
2.
Note
Before listening to voice mails, ensure that the voice mail access code has been configured. For
more information, refer to
350
to launch Message application.
Configuring the Voice Mail Access Codes
to cancel.
on page 350.
or