Replace Rule - Yealink SIP-T56A User Manual

Dial-now

Area Code

Block Out

Basic expression syntaxes you need to know:
The dot "." can be used as a placeholder or multiple placeholders for any
.
character. Example:
"12." would match "123", "1234", "12345", "12abc", etc.
An "x" can be used as a placeholder for any character. Example:
x
"12x" would match "121", "122", "123", "12a", etc.
Numeric ranges are allowed within the brackets: Digit "-" Digit. Example:
-
"[5-7]" would match the number"5", "6"or "7".
The square brackets "[]" can be used as a placeholder for a single character
[] which matches any of a set of characters. Example:
"91[5-7]1234" would match "9151234", "9161234", "9171234".
The parentheses "( )" can be used to group together patterns, for instance, to
() logically combine two or more patterns. Example:
"([1-9])([2-7])3" would match "923", "153", "773", etc.
The "$" should be followed by the sequence number of a parenthesis. The "$"
plus the sequence number means the whole character or characters placed in
the parenthesis. The number directs to the right parenthesis when there are
more than one. Example:
$
A replace rule configuration, Prefix: "001(xxx)45(xx)", Replace: "9001$145$2".
When you dial out "0012354599" on your phone, the IP phone will replace the
number with "90012354599". "$1" means 3 digits in the first parenthesis, that
is, "235". "$2" means 2 digits in the second parenthesis, that is, "99".
The IP phone supports a new dial plan mechanism – digit map. Digit maps are defined by a single
Note
string or a list of strings. If a number you dial matches any string of a digit map, the call is
automatically placed.
Note that if digit map feature is enabled, the old dial plan rules (described in this chapter) will be
ignored. For more information, contact your system administrator.

Replace Rule

You can configure one or more replace rules (up to 100) to remove the specified string and
replace it with another string. You can configure a pattern with wildcards (refer to the expression
syntax in the table above), so that any string that matches the pattern will be replaced. This
feature is convenient for you to dial out a long number. For example, a replace rule is configured
as "Prefix: 1" and "Replace: 1234", when you try to dial out the number "1234", you just need to
enter "1" on the phone and then tap Send.
Customizing Your Phone
165