Yealink SIP-T56A User Manual page 53

Tap the desired value (IPv4, IPv6 or IPv4 & IPv6) in the pop-up dialog box.
4.
Tap to accept the change or
5.
You can configure a static IPv4 address for the IP phone. Before configuring it, make sure that
the IP mode is configured as IPv4 or IPv4 & IPv6.
To configure a static IPv4 address via phone user interface:
Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
1.
Tap Settings->Advanced (default password: admin) ->Network->WAN Port->IPv4.
2.
Tap the Type field.
3.
Tap Static IP in the pop-up dialog box.
4.
Enter the desired value in the IP Address, Subnet Mask, Gateway, Primary DNS and
5.
Secondary DNS field respectively.
Tap to accept the change or
6.
You can configure a static IPv6 address for the IP phone. Before configuring it, make sure that
the IP mode is configured as IPv6 or IPv4 & IPv6.
to cancel.
to cancel.
Getting Started
53