Resolving Issues With Browser; Resolving Issues With Input - SMART Board 6000 series Installation And Maintenance Manual

CHAPTER 8
TROUBLESHOOTING

Resolving issues with Browser

Issue
There is an issue with Browser.

Resolving issues with Input

Issue
There is an issue with the image.
There is an issue with touch.
60 smarttech.com/kb/171167
Solutions
Make sure the display is connected to a network.
l
See Connecting to a network on page 28.
If Browser can't visit secure (https) websites, ensure the display's date and time
l
are correct.
See Date & time on page 76.
Contact your system administrator.
l
Solutions
See Resolving issues with video on page 56 for more information.
l
If you're using two connected video cables, use one longer cable or move the
l
computer so it's within a single cable length of the iQ appliance.
If your computer is connected to the iQ appliance, verify that the input source is
l
OPS/HDMI.
See Connecting cables for room computers, guest laptops and other input
sources on page 21.
If the display's input source is OPS/HDMI, make sure your computer is
l
connected to the iQ appliance.
See Connecting cables for room computers, guest laptops and other input
sources on page 21.
The video signal from your computer or mobile device might be HDCP
l
protected. Connect your computer to the display's connector panel.
See Connecting cables for room computers, guest laptops and other input
sources on page 21.
The computer or mobile device's video resolution settings and refresh rates
l
aren't supported by the iQ appliance. The iQ appliance supports the following
resolutions and refresh rates:
1920 × 1080 at 60 Hz
o
1600 × 900 at 60 Hz
o
1280 × 720 at 60 Hz
o
Make sure the USB cable is securely fastened to both your computer and the iQ
l
appliance.
Use a USB 2.0 cable and make sure it's connected to the correct USB
l
receptacle.
See Connecting cables for room computers, guest laptops and other input
sources on page 21.
If touch interactivity is slow, close some open applications on the computer.
l
Make sure the latest version of SMART Product Drivers is installed on your
l
computer.
See smarttech.com/downloads.
Remove any USB cable extenders. For best results, use a 16' (5 m) or shorter
l
USB cable.