CHAPTER 4
CONFIGURING THE DISPLAY
To turn on the display for the first time
1. Flick the switch beside the AC power inlet to the ON (I) position.
2. Follow the on-screen instructions to calibrate the display.
IMPORTANT
Use the pen, rather than your finger, when calibrating the display.
3. Select your preferred language, and then tap Next.
4. Select your country, and then tap Next.
5. Name the display, and then tap Next.
6. Set the date and time, and then tap Next.
7. If the display isn't using a wired network connection, select a wireless network, and then tap
Next.
8. Select the list of applications that will appear in the launcher, and then tap Next. For more
information about the apps, see the SMART Board 6000 series interactive displays user's
guide (smarttech.com/kb/171166)
9. Tap Finish.
The Welcome screen appears.
Connecting to a network
You can connect the display to a network using either Wi-Fi or an Ethernet connection. Before you
do so, your organization's network administrators need to configure the network for the display.
28
smarttech.com/kb/171167