Evaluating The Impact Of Screen Share On Your Network Data Usage - SMART Board 6000 series Installation And Maintenance Manual

Hide thumbs Also See for 6000 series:
Table of Contents

Advertisement

CHAPTER 4
CONFIGURING THE DISPLAY
4. Tap Wi-Fi > ... > Advanced > Install Certificates.
The USB Drive window appears.
5. Tap USB Drive.
6. Select a certificate to install.
7. If required, enter a password to extract the certificate.
8. Optionally, enter a name for the certificate in the Certificate name box and reason for
certificate use in the Credential use box. Tap OK.
9. A window appears requesting that a lock screen PIN, pattern or password be set before using
the certificate. Tap OK.
10. Select a pattern, PIN or password method. Tap OK.
IMPORTANT
Make note of the pattern, PIN or password. The pattern, PIN or password may be required to
install future certificates.
If the pattern, PIN or password is forgotten, a factory reset is required before installing more
certificates.
The iQ system software confirms the certificate was installed.

Evaluating the impact of Screen Share on your network data usage

When you connect your device or computer to the display using Screen Share, the screen sharing
protocol compresses the image from your device or computer. The protocol may transmit only
areas of the screen that change. This can make it difficult to estimate the impact of Screen Share
on a network where many users would like to screen share simultaneously.
For example, in a school where 30 teachers are using Screen Share simultaneously, 10% of
teachers might be streaming video while 90% might be sharing static content with occasional
updates. In such an instance, you could expect to see an additional 5 Mbps in network traffic. Use
the following table to help estimate the impact of wireless Screen Share on your network.
Content being shared
Static content with minor screen movement
Static content with periodic scrolling or
refreshes
Gaming or streaming video with major screen
changes
34
smarttech.com/kb/171167
Data rate transmission
20 kb/sec
Spikes briefly to 500–600 kb/sec, returns to 20
kb/sec
700 kb/sec–1.2 Mbps

Advertisement

Table of Contents
loading

Table of Contents