Using Transportation Aides; Accommodating Doorways, Hallways And Elevators - SMART Board 6000 series Installation And Maintenance Manual

CHAPTER 2
INSTALLING THE DISPLAY
IMPORTANT
Transport the display at your own risk. SMART cannot accept liability for damages or injury
l
that occur during the display's transportation.
When transporting the display, do the following:
l
Follow local safety regulations and standards.
o
Keep the display in its original packaging.
o
Move the display so that its top frame faces up.
o
Have at least two people move the display.
o

Using transportation aides

You can use the following aides to transport the display:
Cart
l
Furniture dolly
l
Mechanical lift
l
NOTE
The SPNL-6075 and SPNL-6275 models feature eyebolt mounting holes for
use with a mechanical lift. Refer to these models installation instructions for
information on using a mechanical lift.

Accommodating doorways, hallways and elevators

In some situations, you might need to remove the display from its packaging to move it through
narrow doorways or hallways or on to an elevator. In these situations, SMART recommends that
you keep the foam pieces on the bottom corners of the display. These foam pieces protect the
display if you need to set it down during transport.
You might also need to rotate the display so that its top frame faces to the side. You can do this
during transportation, but when you install the display, it must be in landscape orientation (with the
top frame facing up).
12 smarttech.com/kb/171167