Toro Power Max Service Manual page 87

4. Loosen the screw securing the latch cable and
unhook the cable from the latch (Fig. 220).
5. Raise the front of the face gear and slide it off the
chute rod (Fig. 221).
Power Max Service Manual
Fig 220
MVC-152X
Fig 221
MVC-149X
DISCHARGE CHUTE
6. Remove the shoulder bolt from the chute gear
(Fig. 222).
7. The chute gear is attached to the bracket by two
screws. Remove the screws and lift the gear off the
bracket. Note: a plastic spacer is under the bracket.
Fig 222
MVC-154X
10-5