11. Slide the complete 32-tooth gear sprocket onto the
shaft (Fig. 200).
12. Install fl at washer (Fig. 201).
Power Max Service Manual
TRACTION DRIVE SYSTEM
Fig 200
MVC-1180X.jpg
Fig 201
MVC-1177X.jpg
WHEEL CLUTCH
13. Make sure 11-tooth gear slides on so it is fl ush with
the end of the shaft (Fig. 202).
14. Make sure the pawls are up against the thrust washer
and the springs are not binding and are compressing
properly (Fig. 203).
Fig 202
MVC-1184X.jpg
Fig 203
MVC-006X.jpg
9-23