Toro Power Max Service Manual page 82

WHEEL CLUTCH
TRACTION DRIVE SYSTEM
15. Apply a light coat of anti seize to the 11-tooth gear
(Fig. 204). Repeat the process for the opposite side.
16. Assembly can now go back into housing (Fig. 205).
9-24
Fig 204
MVC-035X.jpg
Fig 205
MVC-1905X.jpg
Refer to the drive system reassembly procedure, beginning
with step 17 on page 9-14.
After installation into the housing, rotate left and right
collars fully to the stop. Ensure that the mechanism
operates smoothly. Check each of the 6 pawls to ensure
that it returns fully when the shift collar is released. (A
non-returning pawl indicates binding or missing parts).
Power Max Service Manual