Engine; Service Information; Servicing The R Tek Engine; Engine Service Information - Toro Power Max Service Manual

Service Information

The Power Max snowthrowers have both 2-cycle and
4-cycle engines. The process for obtaining parts and
service information is different between them.
4-Cycle Engine
All 4 cycle models use a Tecumseh Snow King engine.
Service information can be obtained through Tecumseh
at the following address.
Tecumseh Products Company
Engine and Transmission Group
Service Division
900 North Street
Grafton, WI 53024
Phone 262-377-2700
2-Cycle Engine
All 2-cycle models use the Toro R tek engine. Service
is handled through the Toro system. Detailed engine
repair information is available in the "E" Engine Service
Manual, Form No. 492-0647.
Power Max Service Manual

Servicing the R tek Engine

Use the following process to service the R tek engine.
1. Remove the three screws across the front of the
engine shroud and 2 screws on each side where the
front and rear shroud meet (Fig. 003).
2. Remove 4 screws securing the belt covers; remove
the belt covers. (Reassembly will be much easier if
the belt covers have been removed.

ENGINE

Fig 003
MVC-001X
3-1