Toro Power Max Service Manual page 32

CONTROLS
2. Remove nut and washer that attach the cable clamp
to the handle (Fig. 051).
3. Slip the cable Z bend out of the wheel clutch lever
on the handle.
4. Reach under the shift plate and compress the small
ears on the cable fi tting (Fig. 052). The cable fi tting
can then be pushed out of the shift plate.
4-12
Fig 051
MVC-889XYL
Fig 052
MVC-899X
5. Disconnect the lower end of the cable from the shift
collar (Fig. 053).
Assembly
1. Feed the lower end of the cable through the shift
plate and snap the cable into the plate. Install the
lower end of the cable into the shift collar outside in,
as shown (Fig. 054).
Fig 053
MVC-898XB
Fig 054
MVC-878XYZ1
Power Max Service Manual