Toro Power Max Service Manual page 62

WHEEL CLUTCH
TRACTION DRIVE SYSTEM
10. Remove both hairpins on either side of the axle of
44-tooth gear (Fig. 126).
11. Remove woodruff key from one side of axle shaft by
sliding the 44-tooth gear inward towards the center
of the shaft to expose the woodruff key. Pry up on
the outside edge of the key to remove it (Fig. 127).
9-4
Fig 126
MVC-853X.jpg
Fig 127
MVC-856X.jpg
12. Slide axle shaft out through bearing retainer one at a
time, holding onto the 44 tooth gear (Fig. 128).
13. Slide tube of axle shaft through housing (Fig. 129).
Fig 128
MVC-858X.jpg
Fig 129
MVC-859XYZ.jpg
Power Max Service Manual