Toro Power Max Service Manual page 72

WHEEL CLUTCH
TRACTION DRIVE SYSTEM
17. Install wheel clutch assembly with the brace shift
plate facing away and up towards housing making
sure collars are correctly installed with the "RIGHT"
and "LEFT" facing inward and the right and left
fl anges are facing you (Fig. 165).
A
A. Left Collar
18. Route the chains around the 32-tooth gear of the
clutch assembly (Fig. 166).
9-14
B
Fig 165
MVC-2200X.jpg
B. Right Collar
Fig 166
MVC-2207X.jpg
19. Attach the shift brace plate to the housing (Fig. 167).
20. Torque the two intermediate shaft screws to 170 to
300 in-lbs. (19.2 to 33.9 Nm) (Fig. 168).
Fig 167
MVC-894XYX.jpg
Fig 168
MVC-8562X.jpg
Power Max Service Manual