Drive System Reassembly - Toro Power Max Service Manual

28. Remove the locknut from pivot pulley and separate
pulley from pivot plate (Fig. 145 and Fig. 146).
Power Max Service Manual
TRACTION DRIVE SYSTEM
Fig 145
MVC-870XB.jpg
Fig 146
MVC-010X.jpg
WHEEL CLUTCH

DRIVE SYSTEM REASSEMBLY

1. Install pivot plate assembly into the housing and
install belt. The idler pulley should be pushed away
from you to install the pivot plate (Fig. 147).
A
A. Idler Pulley
2. Install the two bushings and the two "C" clips onto
the pivot plate shaft (Fig. 148).
Fig 147
MVC-036X.jpg
Fig 148
MVC-037X.jpg
9-9