Toro Power Max Service Manual page 80

WHEEL CLUTCH
TRACTION DRIVE SYSTEM
8. Install RIGHT and LEFT collar.
Note: The top fl anges of the shift collars have "left"
and "right" stamped into them (Fig. 196).
Install accordingly on the right and left ends of
the shaft with the shift brace plate oriented as
shown (Fig. 197).
9-22
Fig 196
MVC-880X.jpg
Fig 197
MVC-1915X.jpg
9. Install compression springs under the pawls (Fig.
198).
10. Slide thrust washer onto the 32-tooth sprocket gear
(Fig. 199).
Fig 198
MVC-001XB.jpg
Fig 199
MVC-002X.jpg
Power Max Service Manual