Toro Power Max Service Manual page 22

CONTROLS
2. On the underside of the control panel, remove the
two screws holding the Quick Stick cover in place
(Fig. 015).
3. Lift the front cover and pull forward to release the
latch tabs on the rear. Set the cover aside (Fig. 016).
4-2
Fig 015
MVC-1869X
Fig 016
MVC-902X
4. Remove the two screws that retain the rod support
to the control panel (Fig. 017).
5. Remove the two carriage bolts and nuts on the chute
control rod and lift the Quick Stick out of the control
panel. Note the location of the cable clamp, as it is
necessary for latch cable function (Fig. 018).
Fig 017
MVC-819X
Fig 018
MVC-725F
Power Max Service Manual