Wheel Clutch Disassembly - Toro Power Max Service Manual

27. Wheels are installed with the "V" tread rotation
forward (Fig. 177).
28. Bolt wheel hub to axle shaft and torque to 115 + 15
in-lbs. (12.99 + 1.7 Nm) (Fig. 178).
29. Install the belt extension cover and belt cover.
30. Check clutch cable adjustment and adjust if
necessary. See Adjustments
Power Max Service Manual
TRACTION DRIVE SYSTEM
Fig 177
MVC-880X1.jpg
Fig 178
MVC-884XT.jpg
WHEEL CLUTCH

WHEEL CLUTCH DISASSEMBLY

1. Remove 11-tooth gear from 32-tooth gear by sliding
it from the shaft (Fig. 179).
2. Slide off washer behind the 11-tooth gear (Fig. 180).
Fig 179
MVC-876XB.jpg
Fig 180
MVC-877X.jpg
9-17