Specifi Cations - Toro Power Max Service Manual

Engine RPM
2-cycle
4-cycle
Auger
26"
28"
Auger Speed
Impeller
Impeller Speed
Chute Rotation
Defl ector tilt angle
Tires Semi pneumatic
Pressure
Ground speeds
Forward
Reverse
Height
Overall Width
Length
Weight
Fuel Capacity
2 cycle engine
4 cycle engine
Fuel/oil
2-cycle Fuel
2-cycle Required oil
4-cycle Fuel
4-cycle Oil
The recommended weight varies with the outside temperature
For Temps Above 32
For Temps Between 0
0 0
32 F ( -18
For Temps Below 0
Auger Gearbox lubricant*
*A multi weight may be used such as 85-120 as long as it meets the GL rating. Place the
unit on level ground and fi ll to the fi ll/check plug. Maximum capacity 4 oz (118ml).
Power Max Service Manual
4,000 +250 -250 RPM
3,300 +150 -150 RPM
26" (66cm) Wide & 21.5" (54.6cm) High
28" (71cm) Wide & 21.5" (54.6cm) High
123 RPM @ engine RPM listed above
12" Dia. (30.5cm)
1228 RPM @ engine RPM listed above
200 degrees
70 degrees
15x500x6
17-20 psi ( 116-137kPa)
0.7, 1.1, 1.5, 1.9, 2.3, 2.7 mph
(1.1, 1.8, 2.4, 3.0, 3.7, 4.3 kph)
1.0 & 1.6 mph
(1.6 & 2.5 kph)
44.5" (113cm) Approx.
27.5" (69.8cm) and 29.5" (74.9cm)
62" (157cm)
724= 210 lbs (462kg) 826= 238 lbs (526kg)
828 & 1028= 245 lbs (539kg) 1128= 253 lbs (556kg)
1.46 US qts (1.38l)
4 US qts (3.8l)
Unleaded regular grade gasoline mixed at a ratio of 50:1
2.6 oz. (80ml) oil / 1 US gallon (3.8l) gasoline.
Toro 2 cycle oil or any 2-cycle oil that is NMMA TCW3
(ISO E GD) certifi ed as an acceptable substitute.
Unleaded regular grade gasoline (do not mix with oil).
automotive detergent oil with a service classifi cation of
SH or higher Maximum capacity 26 oz. (770ml)
0 0
F (0 C) use SAE 30W
0
F and use SAE 5W30 or SAE 10W
0
C to 0 C)
0 0
F (-18 C) use SAE 0W30
SAE 90 gear oil with a rating of GL5 or higher
SPECIFICATIONS
2-1