Setting the water hardness level
Water hardness can be set between 0 - 70 gr/gal.
Additional settings
Open the
the button and then switch it on again with the button whilst
keeping the button pressed in.
Open the menu as follows:
Additional settings
Water hardness
The bottom line of the display shows the possible input range.
Water hardness input values can be found in the chart on the next
page.
Where the water hardness fluctuates, e.g. between 8 - 17 gr/gal,
always program the machine to the higher value, 17 gr/gal in this
example.
Set the water hardness level using the arrow buttons ( = higher
and = lower).
Press OK to save the setting.
menu by switching the machine off with
Water hardness
19
gr/gal
(0 - 70
gr/gal )
Water softener
29