Samsung DCS-VIP User Manual page 87

[205] STN NAME
SAM SMITH
4. Press TRSF to save and exit
OR
Press SPK to save and advance to next MMC
RELATED ITEMS
MMC 404
105 105 STATION SPEED DIAL STATION SPEED DIAL
105 105 STATION SPEED DIAL STATION SPEED DIAL
Allows the system administrator or technician to program the personal
speed dial locations assigned to a station. This must be done for
single line
programming. Each station may have up to 50 locations or bins assigned
to it in MMC 606 (Assign Speed Block). The speed dial
numbered 00-49. Each speed dial number consists of a trunk or trunk
group access code followed by a separator and up to 24 digits to be
dialed. These dialed digits may consist of 0-9, * and #. If the system
recognizes a valid
automatically insert the separator.
DEFAULT DATA
NONE
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
B
C
D
"C"
E
"[" or "]")
F
106)
ACTION DISPLAY
1. Press TRSF 105
Display shows
[201] SPEED DIAL
00 :
2a. Dial station number (e.g., 205)
OR
Use UP and DOWN to select station
and press RIGHT soft key to move cursor
OR
Press LEFT soft key to go to step 4
[205] SPEED DIAL
00 :
2b. If selected station has no speed dial bins,
the display will be as shown and
a new station may be selected
[205] SPEED DIAL
SPDBLK NOT EXIST
3. Dial location number (e.g., 05)
OR
Press UP or DOWN to select location
and press RIGHT soft key to move cursor
TRUNK NAME
telephones because
trunk or trunk
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to insert a flash code "F"
Used to insert a pause code "P"
Used to insert a pulse/tone conversion code
Used to mask/unmask following digits (shows as
Used to enter name for speed dial bin (see MMC
87
DCS-VIP User Guide
these stations
group access number,
cannot access
bins are
it will