Table of Contents
Advertisement
MMC 301 ASSIGN STATION COS
MMC 501 SYSTEM-WIDE TIMERS
MMC 502 STATION TIMERS
MMC 701 ASSIGN COS CONTENTS
MMC 722 STATION KEY PROGRAMMING
MMC 723 SYSTEM KEY PROGRAMMING
103
103
103
103
SET ANSWER MODE
SET ANSWER MODE
SET ANSWER MODE
SET ANSWER MODE
Allows the system administrator to change the answer mode of any
keyset or add-on module (AOM). Each keyset or AOM can have its answer
mode set to one of the following options:
0.
RING MODE : The keyset will ring in one of eight custom ring
patterns. Calls are
answered by pressing the ANS/RLS key or by lifting the handset.
1.
AUTO ANSWER MODE : After giving a short attention tone, the
keyset will automatically answer calls on the speakerphone. When a
C.O. line is transferred to a keyset in Auto Answer, the screened
portion of the call will be Auto Answer, but the keyset or AOM will
ring when the transfer is complete if the user has not pressed the
ANS/RLS key or lifted the handset.
2.
VOICE ANNOUNCE : The keyset will not ring. After a short
attention tone, callers can make an announcement but the ANS/RLS key
or handset must be used to answer calls.
DEFAULT DATA
ALL KEYSETS RING MODE
RING FREQUENCY DEFAULT IS 5
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
DISPLAY
1.
Press TRSF 103
Display shows
[201] ANS MODE
RING MODE
2.
Dial station number (e.g., 205)
OR
Use UP and DOWN to select keyset
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all stations.
[205] ANS MODE
RING MODE
3.
Dial 0,1 or 2 to change ring mode
OR
Press UP or DOWN to select ring mode and
press RIGHT soft key to return to step 2
[ALL] ANS MODE
?
4.
Press TRSF to save and exit
OR
Press SPK to save and advance to next MMC
[205] ANS MODE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
85
DCS-VIP User Guide
Advertisement
Table of Contents
