Samsung DCS-VIP User Manual page 50

Mode : For each trunk group select the trunk call type for outgoing calls. The
!
selected type will be used in LCR option.
− SEQU : Ring the first member in the trunk group.
− DIST : Ring the members according to the order you have selected.
Member : Select the members for each trunk group.
!
PGM Message PGM Message PGM Message PGM Message
On the PGM Message screen, you can set or reset PGM message.
You can enter the message into the Message
(Msg. No). You can use up to 16 characters. Enter all your messages and click the
Set button.
Tone Cadence Tone Cadence
Tone Cadence Tone Cadence
On the Tone Cadence screen, you can reset the tone cadence for the system.
Select the following parameter values for each type of tone and click the Set
button.
Cadence Status : Select the cadence status.
!
cadence value is NONE.
− Continuous : Continuous tone.
− Interrupt : Interrupt tone.
First Cadence/ Second Cadence : Set the cadence if you selected 'Interrupt'
!
On (100ms) : Set the duration for on time.
−
− Off (100ms) : Set the duration for off time
Wild Char Wild Char Wild Char Wild Char
On the Wild Char screen, you can select to use the Wild Character Option.
Tick the possible values for each wild character X, Y, and Z. For instance, if you
selected 1,2 for possible values for wild character X, you will have "01" and "02" for
"OX".
Ring Plan Table Ring Plan Ring Plan Ring Plan Table Table Table
On the Ring Plan Table screen, you can set the time when the system changes from
nighttime mode to daytime mode, and vice versa.
Night Start Time : Set the Start Time for daytime mode.
!
Night End Time : Set the End Time for nighttime mode.
!
Click the Set button.
Account Account Account Account Code Code Code Code
On the Account Code screen, you can select the Account Code to be entered in
order to charge the relevant telephone rate whenever a phone call is made. There
are 10 available entries.
On the Entry choose the entry number to select the Account Code or choose the
entry number to click the Operation dropdown button to select the table entry
number. At the bottom of the screen, the Account Code
Enter a 12-digit Account Code consisting of the numbers 0 ~ 9. Select an Account
Code for each entry. Click the Set button.
DCS-VIP User Guide
parameter
If a status is 'continuous', all
50
for each message number
parameter will appear.