Table of Contents
Advertisement
Group 3 ( ( ( (Accessories
Group 3
Group 3
Group 3
Accessories) ) ) )
Accessories
Accessories
In the Accessories menu, you can set up additional functions such as MLPPP, Access
List and Rule Map.
MLPPP Option Setup
On the MLPPP Options Setup screen, you can set up options for the Multi-link PPP.
Channel$:$Select the channel you want the MLPPP function for. (Choose from
!
CHANNEL 1 and CHANNEL 2 in the PPP Setup menu.)
Circuit Index : If you select X.25 for WAN protocol, enter the virtual circuit
!
number as X.25. If you select PPP for WAN protocol, enter '0'.
Multilink Protocol Configuration Header Format : Select the format of MLPPP
!
header that will be used.
MRRU (Max Received Reconstructed Units) : Enter the maximum packet
!
(unit) size received and reconstructed on MLPPP.
Bundle Class : Decide the Identifier address space used in MLPPP Bundle..
!
Bundle Address : Enter the Bundle Address of MLPPP.
!
After finishing setting up all the parameters above, click on the SET button. If you
want to set up the MLPPP function for the other channel, click on the NEXT button
and enter the information for MLPPP. Then, click on the SET button.
Access List Setup
On the Access List Setup screen, you can define the filter rules to permit or prevent
access to the user's network for special packets.
Rule Number :
!
You can define filter Rules to 100 at its maximum. And discriminate each one using
this number. At this time, the number possible for enter is the value between 1 and
100.
Protocol Type :
!
will
apply.
Direction :
Select whether filter rules will apply to transmitted or received
!
packets.
−
IN : Filter rules apply to received packets.
−
OUT : Filter rules apply to transmitted packets.
−
BOTH : Filter rules apply to both transmitted and received packets.
Source Address :
!
rules. Currently, the format of the address depends on the protocol type set in
`Protocol
Type'.
Source Masking$ $ $ $ : This is the subnet mask of the source network applying the
!
filter rules.
Enter the number of MSB bit checked in source network address.
Destination Address :
!
filter rules. Currently, the format of the address depends on the protocol type set in
`Protocol Type'.
Destination Masking$:
!
applying the filter
network address.
Source Port Number : This is the range of port/socket numbers or the
!
port/socket number of the source applying the filter rules. If '*' is entered for this
parameter, the port/socket number will not matter. The range of numbers is 220-
300.
Destination Port Number : This is the range of port/socket numbers or the
!
port/socket number of the destination applying the filter rules. If '*' is entered for
this parameter, the port/socket number will not matter. The range of numbers is
Select the character number of filter rules defined on this screen.
Select the protocol type of the packets to which the filter rules
This is the address of the source network applying the filter
This is the address of the destination network applying the
This is the subnet mask of the destination network
rules.
Enter the number of MSB bit checked in destination
71
DCS-VIP User Guide
Advertisement
Table of Contents
