Samsung DCS-VIP User Manual page 60

Internet k/p
Hide thumbs Also See for DCS-VIP:
Table of Contents

Advertisement

Authorization : You can make external calls only when an Authorization Code is
entered.
Account : You can make external calls only when an Account Code is entered.
LCR Class
LCR Class
LCR Class
LCR Class
On the LCR Class screen, you can select the LCR(Least Cost Routing) class. LCR is
used to limit the selection of the trunk group.
Click the LCR dropdown button for each station, and select the class of LCR (1 to
4). You can select to set up each class at the Group->LCR Digit/LCR Modify
Digit/LCR Route/LCR Time menu. Click the Set button.
Ring Type
Ring Type
Ring Type
Ring Type
On the Ring Type screen, you can select the ring type for incoming calls.
Click the Ring Type dropdown button to select one option from the three following
options and click the Set button.
ICM RING
CO RING
DATA RING : On for 1 sec. Off for 2 sec. : normal trunk ring without off-hook
tone.
Set Relocation
Set Relocation
Set Relocation
Set Relocation
On the Set Relocation screen, you can switch the parameters of one station with
those of another.
Click the Relocation Port dropdown button for each station to select the
Relocation Port to exchange the information.
online and it immediately reflects the exchanged information if it is uploaded after
being revised.
Speed Block
Speed Block
Speed Block
Speed Block
On the Speed Block screen, you can select a speed block. Each speed block can
accommodate 10 speed dials. Speed dial blocks can be allocated to more than one
station and therefore can be shared.
Click the Speed Block dropdown button to select the speed dial block and click the
Set button.
Station COS
Station COS
Station COS
Station COS
On the Station COS screen, you can select the COS (Class Of Service) for each
station. COS is used to grade the service provided by the DCS-VIP. There are 10
COSs. You can select service items for each COS. This enables you to use allowed
service items.
Select the COS for both day mode and night mode for each station and click the
Set button.
Day : Select the COS for daytime.
!
Night : Select the COS for nighttime.
!
Note
: On for 0.4 sec. Off for 0.2 sec. On for 2 sec. Off for 3 sec.
: On for 1 sec. Off for 2 sec. : normal trunk ring.
60
DCS-VIP User Guide
Relocation Port is selected only in

Advertisement

Table of Contents
loading

Table of Contents