Samsung DCS-VIP User Manual page 34

Set the following parameter values and click the Next button.
No. : Select the trunk number which will be used in MSN mode.
!
MSN Digit : Enter a 12-digit MSN number, using the numbers from 0~9.
!
Destination : Set the station number that will be connected to each MSN
!
number.
BRI SPID/DN BRI SPID/DN BRI SPID/DN BRI SPID/DN
This screen appears only if you set MSN as ISDN Mode parameter on the ISDN
Option screen. You can make a conversion table to use BRI trunks in the MSN
(Multiple Service Number) mode in North America.
Set the following parameter values and click the Next button.
MSN Digit : Enter a 12-digit MSN number for each trunk number, using
!
numbers from 0 ~ 9.
SPID : Enter the SPID (Service Profile Identifier) number for each MSN number.
!
The SPID number is allocated by the ISDN service provider.
Destination : Set the station number that will be connected to each MSN
!
number.
KP Side Configuration Confirm KP Side Configuration Confirm KP Side Configuration Confirm KP Side Configuration Confirm
The Keyphone function configuration is now done. Check the data carefully.
For any corrections, click on the Prev button to go back to the previous stage.
DCS-VIP User Guide
34