Samsung DCS-VIP User Manual page 52

LCR Digit : Enter a 10 digit string, using 0~9, *, #.
!
No. of digits : Enter how many digits are required to match the LCR digit string..
!
Route Table
!
You can define the actual route for the selected Route table number in the LCR
Route menu.
Select all the LCR digits for each entry and click the Set button.
LCR Modify Digit LCR Modify Digit
LCR Modify Digit LCR Modify Digit
On the LCR Modify Digit screen, you can set the LCR Modify Digit to insert or
append digits to the dialed digits.
On the Entry click
to select the table entry number. At the bottom of the screen the following
parameters will appear.
Digit to be deleted : Enter the digits to be deleted (maximum 15 digits.)
!
Insert Digit : Enter up to 11 digits to insert , using 0~9,*, #, P.
!
Append Digit : Enter up to 11 digits to append, using 0~9,*, #, P.
!
Click the Set button.
Note
The digit will
calculation: digit to be inserted +dialed digit – digit to be deleted
+ digits to be appended.
System Speed Dial System Speed Dial System Speed Dial System Speed Dial
On the System Speed Dial screen, you can set the speed dial for each station group
with the allocated speed dial block. If none of the speed dial blocks is allocated, you
cannot enter the speed dial.
On the Bin No click the table entry number to select the system speed dial or click
the Operation dropdown button to select the entry number. At the bottom of the
screen the following parameters will appear.
Bin Name : Enter the speed dial name.
!
Trunk Tel No. : Select the trunk number.
!
Outgoing digits : Enter frequently-used outgoing telephone number.
!
Register the speed dial for each entry and click the Set button.
Toll Allow Toll Allow
Toll Allow Toll Allow
On the Toll Allow screen, you can select the class to allow for the outgoing trunk.
On the Entry click the entry number to select the class to allow for the outgoing
trunk or click the Operation dropdown button to select the table entry number.
Six buttons will appear for you to choose which classes for the trunk outgoing for
each class. Click the ticking button to allow for the call outgoing to tick it on and
click the Set button.
Toll Deny Toll Deny
Toll Deny Toll Deny
On the Toll Deny screen select the class to deny the trunk outgoing.
On the Entry click the entry number to select the class to deny for the trunk
outgoing or click Operation dropdown button to select the table entry number. Six
: Enter the Route
#
the table entry number or click the Operation dropdown button
be dialed after
52
DCS-VIP User Guide
table number you
going through the
want to use.
following