Table of Contents
Advertisement
external call forwarding.
34. FIRST DIGIT TIME (1-255 SEC)
system will wait for dialing to begin before dropping the dial tone and returning the
user to error tone.
35. HOK FLASH MAX TM (20-2500 MSEC)
a hookswitch flash to ensure that the flash is valid and not a line noise or an
accidental hookswitch bounce (LONGEST DURATION).
36. HOK FLASH MIN TM (20-2500 MSEC)
a hookswitch flash to ensure that the flash is valid and not a line noise or an
accidental hookswitch bounce (SHORTEST DURATION).
37. HOOK OFF TIME (100-2500 MSEC)
dial tone is sent to a single line station.
38. HOOK ON TIME (20-2500 MSEC) : This timer sets the minimum amount of
time that the system will recognize as an SLT hang up.
39. INQUIRY RELEASE (1-255 SEC) : This timer monitors the duration of the
interaction of the soft key to determine when to return the LCD back to normal
status. This timer affects only display phones.
40. INTER DIGIT TIME (1-255 SEC)
period between dialing valid digits before dropping the call and returning the user
back to error tone.
41. ISDN INT DGT TM (1-15 SEC) :
between dialing valid digits and the end of the dialing string on an ISDN call.
42. KMMC LOCK OUT TM (10-255 SEC)
period between programming actions while in a programming session. The timer
automatically returns the system to secure programming status.
43. LCR ADVANCE TIME (1-255 SEC)
time before selecting the next allowable route when a station is allowed to route
advance.
44. LCR INTER DIGIT (1-255 SEC) :
between dialing valid digits before dropping the call and returning the user to error
tone.
45. MCL DELAY TIME (1-8 SEC) : Controls the time when the system should start
transmitting Authorisation code after sending MCL Access code.
46. MS LED ON TIME (0-10 SEC)
Signalling key will remain on after use.
47. OFF HOK RING INT (1-255 SEC)
time between ring bursts to a user who has a camped-on call.
48. OFF HOOK SELECT (1-255 SEC) : This timer controls the grace period before
placing a internal/external call as programmed in MMCs 306 and 307.
49. OHVA ANSWER TIME (1-255 SEC)
duration of an OHVA call before automatic rejection.
50. PAGE TIME OUT (1-255 SEC)
announcement.
51. PAGE TONE TIME (100-2500 MSEC)
tone burst heard over the page prior to the page announcement.
52. PARK RECALL TIME (0-255 SEC)
time a call is parked before recalling to the call park originator.
53. PC-MMC LOCK TIME (1-60 MIN) : This timer monitors the PCMMC activity,
drops the link if no action is created by PCMMC and returns the system to secure
program status.
55. POWER DOWN TIME (100-2500 MSEC)
the ROM pack to begin shutdown status.
60. RECALL DISCONNECT (1-255 MIN)
will ring before being disconnected.
61. RECALL WAIT TIME (0-255 SEC)
transfer) continues to recall at your station before it recalls to the operator.
64. SYS HOLD RECALL (0-255 SEC) : This timer determines the time calls can be
left on hold before recalling back to the holding station. This is a system-wide
timer. Setting timer to 000 means no recalling will take place.
65. TRANSFER RECALL (0-255 SEC) :
: This timer controls how long the
: This timer monitors the duration of
: This timer monitors the duration of
: This timer controls the time before
The timer controls the grace
:
This
timer
controls
This timer controls the grace
:
: This timer controls the duration of
This
timer
controls
: This timer controls the duration a Manual
: This timer controls the duration of
This
timer
:
: This timer controls the duration of a page
: This timer controls the duration of
: This timer controls the duration of
: This timer monitors the power to
: This is the time an attendant recall
: This is the time any recall (hold or
This
timer
determines
142
DCS-VIP User Guide
the
grace
period
the
grace
period
controls
the
the
time
time
that
Advertisement
Table of Contents
