Table of Contents
Advertisement
TCP/IP Network Configuration
After the TCP/IP protocol is installed, configure the TCP/IP in the PCs connected to
the DCS-VIP, following these steps.
1. Click the
[
2. When the [Control Panel] screen is displayed, double-click the [Network] icon.
3. Select TCP/IP in [Configuration] on the [Network] screen and click the
[
Properties
[Network Configuration], select the one that is bound to an Ethernet
networking adapter.
4. When the [TCP/IP Properties] screen with [IP Address] tab selected is
displayed, select [
255.0.0.0 for Subnet Mask.
5. Click the [Gateway] tab and enter 1.1.1.1 for the new gateway. Click the
button.
[
]
Add
6. Click the [DNS Configuration] tab and choose [Enable DNS]. Enter the host
name in the [Host] box.
7. Click the
saying "restart the system" is displayed, click the
Windows.
button at the bottom and select [Settings]
]
Start
button. If more than one TCP/IP component is included in the
]
Specify an IP address
OK
button on [TCP/IP Properties] screen. When the message box
[
]
DCS-VIP User Guide
]. Enter 1.1.1.2 for IP Address and
26
[Control Panel] .
OK
button and reboot
[
]
Advertisement
Table of Contents
