All Pickup : Allow non-pickup groups to pick up.
!
System VMAA Opt
System VMAA Opt
System VMAA Opt
System VMAA Opt
On the System VMAA Opt screen, you can set the options related to VM (Voice mail)
and AA (Auto Answering).
There are 8 options as follows. Click the
select the option value. Click the Set button.
DN1 Extension No.
!
DN1 Trunk No.
!
DN2 Extension No.
!
DN2 Trunk No.
!
Separator
!
Disconnect-Signal
!
Progress Tone
!
−
Dial-Tone
−
Busy-Tone
−
RBAK-Tone
−
DND-Tone
−
ANS-HSET
−
ANS-SPK
Call type
!
−
Directory
−
All FWD Call
−
Busy FWD Call
−
NOANS FWD Call
−
Recall
−
Direct Trunk Call : Direct Trunk Call
−
Overflow
−
DID Call
−
MSG Call
My Area Code
My Area Code
My Area Code
My Area Code
On the My Area Code screen, you can set the name of the country and the area
code (four digits maximum). This code and name indicate the area and country
where the DCS-VIP system is installed.
Select the Area Code and the Country. Click the Set button.
Area Code : Enter a 4-digit area code, using the numbers from 0~9.
!
Country : Select the country where the system is installed.
!
DGP Volume
DGP Volume
DGP Volume
DGP Volume
On the DGP Volume screen, you can control the digital phone volumes. You set the
volume for each sound type.
Click the dropdown button for each sound type to select the sound volume. Click
the Set button.
Key Tone Volume : Set the volume of the key tone.
!
Side Tone Volume : Set the volume of the side tone.
!
Handset Tx : Set the volume of Handset TX.
!
MIC TX Level : Set the level of MIC TX.
!
Noise Guard/Noise Thres/ALC Thres/TX/RX Thres/TX/RX Comp : General
!
users are advised not to change the default values for these parameters since they
variations
: The first dial number of station
: The first dial number of trunk
: The second dial number of station
: The second dial number of trunk
: Separator symbol
: Disconnect signal
: Dial Tone
: Busy Tone
: Ringback Tone
: Call Deny Tone
: Headset Answer
: Speaker Answer
: Direct call
: Unconditional call forwarding
: Busy Forward Call
: No Answer Forward Call
: Recall
: Overflow Call
: Internal Direct Call
: Message Call
57
DCS-VIP User Guide
button for each parameter to