Table of Contents
Advertisement
If you chose ISP for Connection To parameter on the Router Wizard Setup - Setup
1 screen, the following parameters will be displayed. Set the parameter values and
click the Next button.
ISP Phone Number : Enter the ISP phone number.
!
ISP Login Name : Enter the ISP login name.
!
ISP Password : Enter the ISP login password.
!
Note
Contact your ISP if you are not sure about the parameters.
For Remote Router connection
If you chose Remote Router for Connection To parameter on the Router Wizard
Setup - Setup 1 screen, the following parameters will be displayed. Set the
parameter values and click the Next button.
Remote Router Phone Number : Enter the remote node telephone number.
!
Remote Router Login Name : Enter the remote node login name.
!
Remote Router Password : Enter the remote node password.
!
Remote Router WAN IP Address : Enter the IP address of the remote node
!
network.
Remote Router WAN Network Mask : Enter the subnet mask of the remote
!
node network.
Note
Contact your remote network administrator if you are not sure about
the parameters.
DCS-VIP User Guide
37
Advertisement
Table of Contents
