Table of Contents
Advertisement
soft key to move cursor
DID DIGIT (005)
DGT: 5065
4.
Enter station or group number for each Ring
Plan destination via dial keypad (e.g. 530)
OR
Press UP or DOWN key to make selection
Press RIGHT soft key to advance to next
Press RIGHT soft key to
move cursor
DID DIGIT (005)
1:530 2:
5.
Press UP or DOWN key to make selection or
select 1 for YES, or 0 for NO via dial keypad
Press RIGHT soft key to advance to step 6
DID DIGIT (005)
CW:NO DELETE:0
6.
Enter the number of digits to be deleted
OR
Press UP or DOWN key to select digits to be deleted and
press RIGHT soft key to move cursor
DID DIGIT (005)
CW:YES DELETE:0
7.
Enter name using above table and
press RIGHT soft key to return to step 2
8.
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
RELATED ITEMS
TRUNK PROGRAMMING
715
715
715
715
PROGRAMMED STATION MESSAGE
Allows custom messages to be programmed or default messages to be changed.
Messages are written via the keypad. Each press of a key will select a character.
Pressing a different key will move the cursor to the next position. For example, if
the message is "Sunbathing," press the number "7" three times to get the letter
"S." Now press the number "8" twice to get the letter "U." Continue selecting
characters from the table below to complete your message. Pressing the "A" key
will change the letter from upper case to lower case.
Note
ENTER
and
via dial keypad
177
DCS-VIP User Guide
Advertisement
Table of Contents
