Table of Contents
Advertisement
Hot Line
Hot Line
Hot Line
Hot Line
On the Hot Line screen, you can select the internal or external hot line for each
station. If you pick up the handset of a hot line station, it will automatically dial the
programmed telephone number after the hotline waiting period.
First, click the station number to select the Hot Line. The following parameters will
appear to allow you to select Hot Line mode, trunk number, and external outgoing
number. Set the parameter values and click the Set button.
Mode : Select the Hot Line mode.
!
−
Hot Line : Select internal hot line.
Off-Hook Selection : Select external hot line.
−
Hot Line : Select the station for internal hot line after selecting 'Hot Line' in the
!
Mode parameter.
Trunk No : Select trunk number after selecting 'Off-Hook Selection' in the
!
Mode parameter.
Outgoing digits : Enter the outgoing digits after selecting 'Off-Hook Selection'
!
in the Mode parameter.
Key Prog
Key Prog
Key Prog
Key Prog
On the Key Prog screen, you can select the features to be assigned to the digital
handset program buttons.
Select the station number of the user at Station No and select the following
parameters.
Feature : Select the required features.
!
Extension : Select the extension number for trunk line/ trunk group selection.
!
Click the Set button.
Identifying keyphone status
This section describes how to identify the keyphone module status. On the
ADVANCE SETUP
menu. Then, you will see KEYPHONE STATUS screen consisting of following 2
submenus.
System Status
System Status
System Status
System Status
System Status
On the System Status screen, you can check the system date and time, the BRI
port type, the feasibility of the VoIP support, and the software version. You can
change some of these values if required.
System Date and Time : You can check the system date and time.
!
Config Card Status
!
VoIP: You can check the feasibility of the VoIP feature provided as an option.
-
Extension : You can check the DCS-VIP expansion system's BRI port type.
-
Base : You can check the DCS-VIP main system's BRI port type.
-
Version : You can check the system software's version.
!
Port Status
Port Status
Port Status
Port Status
On the Port Status screen, you can refer to the DCS-VIP main/expansion system's
KEYPHONE SETUP menu, select the KEYPHONE STATUS
Port Status
62
DCS-VIP User Guide
Advertisement
Table of Contents
