Table of Contents
Advertisement
OR
Press ANS/RLS to select all stations and
press RIGHT soft key
[ALL} NO ANS FWD
*** SEC →_
3.
Press UP or DOWN key to select timer and
press RIGHT soft key
4.
Enter new value via dial keypad, e.g., 0200
System will return to step 2
[205] NO ANS FWD
0100 MS →200
5.
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
RELATED ITEMS
MMC 102
503
503
503
503
TRUNK-WIDE TIMERS
Allows certain trunk timer values to be changed on a per-trunk basis or for all
trunks. It is not advisable to change these values, with the exception of trunk flash
time, without assistance from Technical Support.
01. CLEARING (100-5000 MSEC)
disconnected at the CO by preventing CO access outgoing or receiving incoming
ring between a disconnect and the expiration of this timer.
03. DTMF DUR. (100-9900 MSEC)
DTMF digits that will be sent to the CO on this line.
04. F-DGT DELY (100-9900 MSEC)
the system will wait for CO line conditions to stabilize after seizure before sending
DTMF digits.
05. FLASH TIME (100-2500 MSEC)
sent on a circuit flagged as PBX in MMC 401.
07. PAUSE TIME (1-255 SEC)
wait before sending the next digit for a pause in a speed dial bin.
DEFAULT DATA
CLEARING
DTMF DUR.
F-DGT DELY
FLASH TIME
PAUSE TIME
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
DISPLAY
1.
Press TRSF 503
Display shows
CALL FORWARD
:
: (DTMF DURation)
: (First DiGiT DELaY) This is the length of time
:
This is the duration of the momentary open
: This is the length of time the system will
:
1000
MSEC
:
100
MSEC
:
600
MSEC
:
600
MSEC
:
3
SEC
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
145
DCS-VIP User Guide
This timer ensures that a call is fully
This is the length of the
Advertisement
Table of Contents
