RADVision SCOPIA XT100 Series User Manual page 10

Step 5
Press
slider until the Top orange frame is fully visible on your monitor. Move to a different slider with
the up and down arrow keys and press
Repeat the procedure for the Left, Bottom, and Right side.
Step 6
Press
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.0
Figure 1-3
. The first slider is highlighted in orange. Use the right and left arrow keys to move the
Figure 1-4
Next to access the display, or press
Checking the Image Size
to move the slider with the right and left arrow keys.
Adjusting the Image Size
Close to exit the quick setup wizard.
'Getting Started' | 5