ABB DCS 500B Description page 221

Software for thyristor power converter
Hide thumbs Also See for DCS 500B:
Table of Contents

Advertisement

Logik f.INHIBIT
Signal of 12-PULSE_LOGIC-function block
This signal is generated by the 12 pulse switch-off logic. In case this signal is used at the
12 pulse data exchange the converters will try to switch off each other in the event of an
error.
Based on the connection diagram this interconnection should be done:
-
in case a 12 pulse system without redundancy is in use (see INHIBIT_LOGIC (3607)):
- connect this output to input START_INHIBIT (908) at both converters, Master and
Follower
-
in case a 12 pulse system with redundancy is in use (see BC_LOGIC (3616)):
- don´t use this signal at both of the converters and keep START_INHIBIT (908) to
default or application dependent
FB_O: B
SC: BO
13616
Input X18:13
Signal of INPUT X18-function block
The signal passed to this pointer is outputted at Plug Connector X18:13. It is operative in
all modes. The interconnections recommended for the different 12 pulse modes are listed
at groupe 36.
FB_O: B
SC: BO
13617
Input X18:14
Signal of INPUT X18-function block
The signal passed to this pointer is outputted at Plug Connector X18:14. It is operative in
all modes. The interconnections recommended for the different 12 pulse modes are listed
at groupe 36.
FB_O: B
SC: BO
13618
Input X18:15
Signal of INPUT X18-function block
The signal passed to this pointer is outputted at Plug Connector X18:15. It is operative in
all modes. The interconnections recommended for the different 12 pulse modes are listed
at groupe 36.
13619
FB_O: B
SC: BO
Input X18:16
Signal of INPUT X18-function block
The signal passed to this pointer is outputted at Plug Connector X18:16. It is operative in
all modes. The interconnections recommended for the different 12 pulse modes are listed
at groupe 36.
FB_O: B
SC: BO
13620
BC not Zero
Signal of 12-PULSE_LOGIC-function block
Signal is set when signal BC (112-05) is different to 0 (Bit 5 of BC is not taken into
account!).
FB_O: B
SC: BO
13621
Reserved f.Commun
Signal of 12-PULSE_LOGIC-function block
This signal is already defined and used for future extensions.
FB_O: I2
SC: 1
13622
HL: -
LL: -
HL: -
LL: -
HL: -
LL: -
HL: -
LL: -
HL: -
LL: -
HL: -
LL: -
HL: -
LL: -
DCS500 Pin and Parameter list
(S13/16 )
D: -
U: -
(S13/16 )
D: -
U: -
(S13/16 )
D: -
U: -
(S13/16 )
D: -
U: -
(S13/16 )
D: -
U: -
(S13/16 )
D: -
U: -
(S13/16 )
D: -
U: -
A 117

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents