ABB DCS 500B Description page 117

DATASET4.[IN1]
Input of DATASET4 function block
DATASET 4 is used for data transmission from the drive to the fieldbus master.
When a fieldbus communication module is connected the DCS 500 can transmit a
3 word telegram called DATASET4.[IN1]...[IN3] to a fieldbus master.
DATASET4.[IN1] selects the address of first word of this telegram.
212 FB_I: C4 SC: -
DATASET4.[IN2]
Input of DATASET4 function block
DATASET4.[IN2] selects the address of second word of this telegram.
213 FB_I: C4 SC: -
DATASET4.[IN3]
Input of DATASET4 function block
DATASET4.[IN3] selects the address of third word of this telegram.
214 FB_I: C4 SC: -
HL: 19999 LL: 0
HL: 19999 LL: 0
HL: 19999 LL: 0
DCS500 Pin and Parameter list
( S12/16 )
D: 0 U: -
( S12/16 )
D: 0 U: -
( S12/16 )
D: 0 U: -
A 13