Group 116: Motor 2 Protection - ABB DCS 500B Description

Group 116: MOTOR 2 PROTECTION

MOT2_MEAS_TEMP
Signal of MOTOR_2_PROTECTION- function block.
Measured temperature of motor 2.
The unit of the value depends on the selection of AI_CONV_MODE (107, 110):
0 = not selected
1, 2 = value scaled by AI_HIGH_VALUE (108,111) and AI_LOW_VALUE (109,112)
3..5 = unit = degrees
6, 7 = resistance value is ohms (but displayed in °C )
11601 FB_O: I2
MOT2_CALC_TEMP
Signal of MOTOR_2_PROTECTION- function block.
Output from thermal model for motor 2.
11602 FB_O: I2
SC: - HL: -
SC: - HL: -
DCS500 Pin and Parameter list
( S9/16 )
LL: - D: -
( S9/16 )
LL: - D: -
U: C
U: %
A 101