ABB DCS 500B Description page 141

WRITE_ENABLE_KEY
Parameter of MAINTENANCE-function block.
Save the parameter access
This is the key number
1207 FB_P: I2 SC: 1
WRITE_ENABLE_PIN
Parameter of MAINTENANCE-function block.
Save the parameter access
This is the personality identify number. Parameter access is only possible if
WRITE_ENABLE_KEY and WRITE_ENABLE_PIN numbers are equal.
1208 FB_P: I2 SC: 1
SELECT_OPER.SYST.
Parameter of MAINTENANCE-function block.
Select the operation mode of converter:
0 = 6P-SINGLE
1 = 12P-MASTER
2 = 12P-SLAVE
1209 FB_P: E2 SC: -
ACTUAL VALUE 1
Input of MAINTENANCE-function block.
Pointer to actual value 1 on panel.
1210 FB_I: C4 SC: -
ACTUAL VALUE 2
Input of MAINTENANCE-function block.
Pointer to actual value 2 on panel.
1211 FB_I: C4 SC: -
ACTUAL VALUE 3
Input of MAINTENANCE-function block.
Pointer to actual value 3 on panel.
1212 FB_I: C4 SC: -
FIELDBUS NODE ADDR
Parameter of MAINTENANCE-function block.
In case a field bus module Nxxx-0x is used keep this parameter to default. If a serial link
has to be established please handle this parameter according to the AC70 documentation.
1213 FB_P: I2 SC: 1
MACRO_SELECT
Parameter of MAINTENANCE-function block.
Select the macros:
0 = NONE
1 = MACRO 1
2 = MACRO 2
3 = MACRO 3
4 = MACRO 4
1214 FB_P: E2 SC: -
HL: 1000 LL: 1
HL: 1000 LL: 1
(6-pulse single mode, default)
(12-pulse master mode)
(12-pulse slave mode)
HL: 2 LL: 0
HL: 19999 LL: 0
HL: 19999 LL: 0
HL: 19999 LL: 0
HL: 255 LL:1
(no macro selected)
(macro 1 selected)
(macro 2 selected)
(macro 3 selected)
(fieldbus macro selected)
HL: 4 LL: 0
DCS500 Pin and Parameter list
( S2/16 )
D: 358 U: -
( S2/16 )
D: 358 U: -
( S2/16 )
D: 0 U:-
( S2/16 )
D: 12103 U: -
( S2/16 )
D: 10501 U: -
( S2/16 )
D: 10505 U: -
( S2/16 )
D: 1 U: -
( S2/16 )
D: 0 U: -
A 37