Loading Paper; Loading Paper In Tray 1 And The Optional Paper Feed Unit - Ricoh SP6330 Hardware Manual

5. Paper and Other Media

Loading Paper

This describes how to load paper into the paper tray and Bypass Tray.
• Do not pull out the paper tray forcefully. If you do, the tray might fall and cause an injury.

Loading Paper in Tray 1 and the Optional Paper Feed Unit

The following example explains loading procedure for the standard paper tray (Tray 1). The same
procedure can be used for the optional paper feed unit.
5
• Make sure paper is not stacked above the limit mark inside the tray. Misfeeds might occur.
• Do not put different types of paper in a single paper tray.
• Up to 500 sheets of paper can be loaded in the paper feed unit. This means a maximum of 1,500
sheets can be simultaneously loaded when two additional paper feed units are installed.
• Confirm that paper fits under the rear guide.
• Do not slide the paper tray in with force. If you do, the front and side guides might move.
1. Lift the paper tray slightly, and then pull it out until it stops.
96
BVN076