Ricoh SP6330 Hardware Manual page 115

By pressing the [ ] or [ ] key, the value increases or decreases by 0.1 mm (0.01 inch).
By pressing and holding the [ ] or [ ] key, the value varies by 1 mm (0.1 inch).
The screen for entering the length appears.
6. Press the [ ] or [ ] key to enter the vertical value, and then press the [OK] key.
By pressing the [ ] or [ ] key, the value increases or decreases by 0.1 mm (0.01 inch).
By pressing and holding the [ ] or [ ] key, the value varies by 1 mm (0.1 inch).
The screen for entering the length appears.
About two seconds later, the display returns to the [Paper Input] screen.
7. Press the [Menu] key.
The display returns to the initial screen.
• The printer driver Help
Specifying a paper type for the Bypass Tray
You can improve the printer's performance by specifying the type of paper that you are placing on the
Bypass Tray. You can select one of the following paper types:
• No Display (Plain Paper), Recycled Paper, Special Paper 1, Special Paper 2, Special Paper 3, Colour
Paper, Letterhead, Label Paper, OHP (Transparency), Envelope, Preprinted Paper, Bond Paper,
Cardstock, Thick Paper 1, Thick Paper 2
Loading Paper
5
113