Ricoh SP6330 Hardware Manual page 89

Input Paper Sizes Envelope Feeder Unit
The following paper size is supported but the paper size should be set with the control panel.
There is no dial on the tray.
Com#10 Env. , C5 Env. , C6 Env. , DL Env. , Monarch Env.
See p.96 "Loading Paper".
Paper Weight and Number of Sheets to Be Set
Tray 1
Bypass Tray
Paper Feed Unit (Tray 2, Tray
3)
Envelope Feeder
Check that the top of the stack is not higher than the limit mark inside the tray.
Paper Size Supported by Both Side Printing
The following paper sizes can be printed on both sides:
A3 , B4 JIS , A4
1
8 / " × 13" (Foolscap) , 8
2
1 1
5 / " × 8 / " (Half Letter)
2 2
• The envelope feeder unit requires the installation of the optional paper feed unit.
• Custom paper size is not supported by both sides printing.
• JIS stands for "Japanese Industrial Standard".
Metric version / Inch version
Supported paper weight
2
60 - 216 g/m
2
52 - 216 g/m
2
60 - 216 g/m
See p.96 "Loading Paper".
Metric version / Inch version
, B5 JIS , A5 , 8K , 16K
1
/ " × 11" (Letter)
2
Supported Paper for Each Tray
Maximum number of sheets
(16 - 57 lb.) 500 (75 g/m
(14 - 57 lb.) 100 (75 g/m
For other kind of papers, see
p.88 "Types of Paper and
Other Media".
(16 - 57 lb.) 500 (75 g/m
, 11" × 17" , 8
1
, 8 / " × 13" (Folio) , 8" × 13" (F/GL) ,
4
(plain paper)
2
, 20 lb.)
2
, 20 lb.)
2
, 20 lb.)
1
/ " × 14" (Legal) ,
2
5
87