Ricoh SP6330 Hardware Manual page 91

Printer driver setup
Enabled paper feeding tray
Number of sheets that can be set
Both-sided printing
Additional cautions
Letterhead
Printer setup
Printer driver setup
Both-sided printing
Thick Paper
Paper thickness
Printer setup
Printer driver setup
Click [Plain (60 to 105 g/m
Type:" list.
Any input tray can be used.
Tray 1: 500
Tray 2, Tray 3 (Paper Feed Unit): 500
Bypass Tray: 100
• Make sure paper is not stacked higher than the upper limit
mark ( ) inside the tray. Make sure paper is not stacked
higher than the paper guides inside the bypass tray.
Possible
When printing on 91 - 130 g/m
slower to when printing on paper of 60 - 91 g/m
Make the following setting using the control panel:
Select [Paper Input] [Paper Type: (tray name)]
Click [Letterhead] in the "Paper Type:" list.
Possible
2
105 - 216 g/m (28 - 57 lb.)
• [Thick Paper 1]: 105 - 157 g/m
• [Thick Paper 2]: 157 - 216 g/m
Make the following setting using the control panel:
Select [Paper Input] [Paper Type: (tray name)]
1] or [Thick Paper 2].
Click [Thick 1 (105 to 157 g/m
2
m )] in the "Paper Type:" list.
Paper Recommendations
2
)] or [Plain & Recycled] in the "Paper
2
paper, print speed is slightly
2
.
[Letterhead].
2
(28 - 42 lb.)
2
(42 - 57 lb.)
[Thick Paper
2
)] or [Thick 2 (157 to 216 g/
5
89