Ricoh SP6330 Hardware Manual page 112

5. Paper and Other Media
3. Adjust the side guides to the paper width.
2
• 45 g/m (12 lb.) paper or paper of A3 or longer may not feed in properly unless it is cut at right
angles.
5
• If you load A4 or larger, slide out the Bypass Tray extension.
Specifying standard size paper for the Bypass Tray
This describes how to load standard size paper into the Bypass Tray.
1. Set the paper size using the control panel. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
110
BVN092
BVP006