Setting Security Method Of Wireless Lan; Setting A Wep Key - Ricoh SP6330 Hardware Manual

4. Configuration

Setting Security Method of Wireless LAN

Setting a WEP Key

If the wireless network uses WEP to encrypt transmitted data, the corresponding WEP key must be set to
the printer to allow communications with other network devices.
Ask the network administrator for the WEP key to use.
1. In the [Wireless LAN] menu, press the [ ] or [ ] key to select [Security Method], and then
press the [OK] key.
4
2. Press the [ ] or [ ] key to select [WEP], and then press [Details].
When activating the WEP setting, you will need to enter the WEP key. If you have not entered the key,
be sure to enter it.
3. A confirmation message appears. Press [Enter].
4. Press the scroll keys to enter characters, and then press [Accept].
• When entering a character, pressing [Accept] will mask it with an asterisk for security reasons.
• When using 64-bit WEP, up to 10 hexadecimal characters or five ASCII characters can be
entered. When using 128-bit WEP, up to 26 hexadecimal characters or 13 ASCII characters
can be used.
76