Ricoh SP6330 Hardware Manual page 110

5. Paper and Other Media
• Be sure to set a paper type using the control panel of the printer as the following procedure. If you
set a paper type only by the printer driver, printing result might not be appropriate.
1. Press the [Menu] key.
5
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Type: (tray name)], and then press the [OK] key.
4. Press the [ ] or [ ] key to select the paper type that is loaded, and then press the [OK]
key.
5. Press the [Menu] key.
The display returns to the initial screen.
• The following paper types cannot be printed on both sides:
108
BVP006