11. Appendix; Moving And Transporting The Printer; Moving The Printer - Ricoh SP6330 Hardware Manual

11. Appendix

This section explains maintenance and operation procedures for this printer. It also describes the
specifications of the printer and it options.

Moving and Transporting the Printer

• When you move the printer, remember to unplug the power cord from the wall outlet to avoid a
fire or an electric shock.
• When you pull out the plug from the socket, grip the plug, not the cord, to avoid damaging the
cord and causing a fire or an electric shock.
• Repack the printer in its original packing materials for transporting.
• Be sure to disconnect all cables from the printer before transporting it.
• The printer is a precision piece of machinery. Take care to avoid damage during shipment.
• If the optional paper feed unit is installed, remove it from the printer, and then move them separately.
• The printer weighs approximately 22.5 kg (49.6 lb.).

Moving the Printer

• When lifting the printer, use the inset grips on both sides. Otherwise the printer could break or
cause an injury if dropped.
• Before moving the printer, unplug the power cord from the wall outlet. If the cord is unplugged
abruptly, it could become damaged. Damaged plugs or cords can cause an electrical or fire
hazard.
Moving the printer in a short distance
• The printer should always be lifted by at least two people.
11
211