Configuration; Ethernet Configuration - Ricoh SP6330 Hardware Manual

4. Configuration

This chapter explains supported network connections, and settings for the IP addresses and the Wireless
LAN security.

Ethernet Configuration

Configure the following network settings according to the network environment using the control panel.
• The following table shows the control panel settings and their default values. These items appear in
the [Host Interface] menu.
Setting Name
Machine IPv4 Address
IPv6 Stateless Setting
IPsec
NW Frame Type
Effective Protocol
Ethernet Speed
IEEE802.1X Auth.(Ethernet)
Restr.IEEE802.1X Auth.Def.
LAN Type
• If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all set
automatically.
Default
• DHCP: On
• IPv4 Address: 11.22.33.44
• Subnet Mask: 0.0.0.0
• Gateway Address: 0.0.0.0
Active
Inactive
Auto Select
• IPv4: Active
• IPv6: Inactive
• NetWare: Inactive
• SMB: Active
• AppleTalk: Inactive
Auto Select
Inactive
-
Ethernet
4
63